Tuesday, December 9, 2008
Invacare Parts - OEM Battery Chargers & More!
We are pleased to now offer the full line of replacement Invacare mobility parts for every make, and every model!
As an authorized Invacare dealer and service center, you can be assured that your replacement parts will be the same high quality OEM parts that originally were installed on your Invacare power chair or Lynx scooter.
In addition to Invacare factory parts, we are fully stocked on a wide variety of mobility tires, inner tubes, batteries, and battery chargers.
We can special order any part direct from Invacare, and have it dropped shipped direct to your door for the fastest service to get you back on the move.
Please see our Invacare model section located here for your Pronto, Nutron, Lynx, and every Invacare model's available parts:
Invacare Parts by Make and Model
Need assistance? Please call our friendly Customer Service Team today at 1-800-798-0325!
Glenn
glenn@monsterscooterparts.com
http://www.monsterscooterparts.com/
As an authorized Invacare dealer and service center, you can be assured that your replacement parts will be the same high quality OEM parts that originally were installed on your Invacare power chair or Lynx scooter.
In addition to Invacare factory parts, we are fully stocked on a wide variety of mobility tires, inner tubes, batteries, and battery chargers.
We can special order any part direct from Invacare, and have it dropped shipped direct to your door for the fastest service to get you back on the move.
Please see our Invacare model section located here for your Pronto, Nutron, Lynx, and every Invacare model's available parts:
Invacare Parts by Make and Model
Need assistance? Please call our friendly Customer Service Team today at 1-800-798-0325!
Glenn
glenn@monsterscooterparts.com
http://www.monsterscooterparts.com/
Friday, November 28, 2008
Joystick Controllers for Mobility Power Chairs
Monster Scooter Parts offers a variety of replacement joystick controllers for mobility power wheelchairs including power chairs by Pride, Jazzy, Jet, and Invacare. Choose from new joystick controllers, reconditioned joystick controllers, joystick rebuild services, and joystick parts.
Most OEM joystick controllers are manufactured by PG Drives Technology. Many newer models feature VSI joystick controllers made by PG Drives Technology.
We have added many joystick controllers to our "shop by make and model" pages to make it easy to identify which joystick controller you need for your power chair. However, if there is no joystick controller listed for your power chair or if you are unsure which one is the correct one for you, please give us a call at 1-800-798-0325 or send us an e-mail at contact@monsterscooterparts.com and we will be happy to assist you.
We are authorized dealers for Pride, Jazzy, Jet, Invacare, and PaceSaver and can have any part for these brands delivered to your door in just a few days!
Kevin
kevin@monsterscooterparts.com
http://www.MonsterScooterParts.com
Most OEM joystick controllers are manufactured by PG Drives Technology. Many newer models feature VSI joystick controllers made by PG Drives Technology.
We have added many joystick controllers to our "shop by make and model" pages to make it easy to identify which joystick controller you need for your power chair. However, if there is no joystick controller listed for your power chair or if you are unsure which one is the correct one for you, please give us a call at 1-800-798-0325 or send us an e-mail at contact@monsterscooterparts.com and we will be happy to assist you.
We are authorized dealers for Pride, Jazzy, Jet, Invacare, and PaceSaver and can have any part for these brands delivered to your door in just a few days!
Kevin
kevin@monsterscooterparts.com
http://www.MonsterScooterParts.com
Wednesday, November 26, 2008
New Look for Monster Scooter Parts!
Monster Scooter Parts is pleased to report that we are currently working on a complete website redesign that we hope to launch just in time for the new year! We will also be using a new logo in 2009. Here is a preview of the "new look" of Monster Scooter Parts:
Sunday, September 7, 2008
50cc GY6 Scooter Engines
We at Monster Scooter Parts continue to add to our replacement engine lineup with high quality 50cc GY6 scooter engines. These 50cc engines are complete with an automatic CVT transmission, and are compatible with virtually all Chinese made 50cc full size street legal scooters that come equipped with a rear drum brake. Detailed specifications and measurements can be found on our 50cc engine page:
50cc 4-Stroke Gas Scooter Engine (GY6/QMB139) - Automatic CVT
Check back often as additional high resolution photographs and dimensions and currently in process.
The GY6 style scooter engine, first introduced by Honda in the 1960s, has been widely used in the street legal scooter and atv industry. Honda no longer uses this style of engine in it's current lineup of scooters, but copies (clones) of the original Honda GY6 design are produced in China, Taiwan, and Korea. Virtually all full size scooters produced in China that currently dominate the market are equipped with the GY6 style scooter motor.
Major branded scooter makes that use the GY6 scooter motors include Baja Motorsports, SunL, Tank, Vento, and X-Treme. All of their current models can be found on our full size scooter parts page:
Street Legal Scooter Parts
Thanks, come back soon!
Glenn
glenn@Monsterscooterparts.com
http://www.monsterscooterparts.com/
50cc 4-Stroke Gas Scooter Engine (GY6/QMB139) - Automatic CVT
Check back often as additional high resolution photographs and dimensions and currently in process.
The GY6 style scooter engine, first introduced by Honda in the 1960s, has been widely used in the street legal scooter and atv industry. Honda no longer uses this style of engine in it's current lineup of scooters, but copies (clones) of the original Honda GY6 design are produced in China, Taiwan, and Korea. Virtually all full size scooters produced in China that currently dominate the market are equipped with the GY6 style scooter motor.
Major branded scooter makes that use the GY6 scooter motors include Baja Motorsports, SunL, Tank, Vento, and X-Treme. All of their current models can be found on our full size scooter parts page:
Street Legal Scooter Parts
Thanks, come back soon!
Glenn
glenn@Monsterscooterparts.com
http://www.monsterscooterparts.com/
Thursday, July 31, 2008
150cc Scooter Motors (Engines)
We are pleased to have received a fresh shipment of 150cc scooter engines (GY6/QMB139 style). These 150cc scooter motors are of very high quality, come equipped with an automatic CVT transmission, and are compatible with virtually all Chinese made 150cc full size street legal scooters. Detailed specifications and meausrements can be found on our 150cc engine page:
150cc 4-Stroke Gas Scooter Engine (GY6/QMB139) - Automatic CVT
We were able to negotiate a very good price for the lot of these 150cc scooter motors, and have passed the savings on to our customers. Our posted retail price is well below our competitors retail price. Timing is everything, and if you're in need of a 150cc scooter motor, now is the time to make that purchase. These engines also are used on all terrain vehicles (ATVs), go karts, dirt bikes, and dune buggies.
The GY6 style scooter engine, first introduced by Honda in the 1960s, has been widely used in the street legal scooter and atv industry. Honda no longer uses this style of engine in it's current lineup of scooters, but copies (clones) of the original Honda GY6 design are produced in China, Taiwan, and Korea. Virtually all full size scooters produced in China that currently dominate the market are equipped with the GY6 style scooter motor.
Major branded scooter makes that use the GY6 scooter motors include Baja Motorsports, SunL, Tank, Vento, and X-Treme. All of their current models can be found on our full size scooter parts page:
Street Legal Scooter Parts
Glenn
glenn@Monsterscooterparts.com
http://www.monsterscooterparts.com/
150cc 4-Stroke Gas Scooter Engine (GY6/QMB139) - Automatic CVT
We were able to negotiate a very good price for the lot of these 150cc scooter motors, and have passed the savings on to our customers. Our posted retail price is well below our competitors retail price. Timing is everything, and if you're in need of a 150cc scooter motor, now is the time to make that purchase. These engines also are used on all terrain vehicles (ATVs), go karts, dirt bikes, and dune buggies.
The GY6 style scooter engine, first introduced by Honda in the 1960s, has been widely used in the street legal scooter and atv industry. Honda no longer uses this style of engine in it's current lineup of scooters, but copies (clones) of the original Honda GY6 design are produced in China, Taiwan, and Korea. Virtually all full size scooters produced in China that currently dominate the market are equipped with the GY6 style scooter motor.
Major branded scooter makes that use the GY6 scooter motors include Baja Motorsports, SunL, Tank, Vento, and X-Treme. All of their current models can be found on our full size scooter parts page:
Street Legal Scooter Parts
Glenn
glenn@Monsterscooterparts.com
http://www.monsterscooterparts.com/
Monday, March 17, 2008
Power Chair Battery Chargers
We continue to strive towards our goal of providing the widest online selection of mobility scooter parts. We've recently added many onboard mobility scooter and power chair battery chargers. Specific brands we've targeted in recent weeks have been Jazzy power chair battery chargers:
Jazzy Battery Chargers
and Jet power chair battery chargers:
Jet Battery Chargers
As an authorized Pride Mobility dealer, including Jazzy and Jet power chairs, we understand the unique needs of our customers, requiring quick delivery and quality replacement mobility parts. We provide high quality OEM power chair battery chargers at discounted prices.
Please contact us today, phone at 1-800-798-0325 or email at contact@Monsterscooterparts.com and a courteous customer service representative will work with you to get your part to you swiftly and safely, and get you back on the move!
Glenn
glenn@Monsterscooterparts.com
http://www.monsterscooterparts.com/
Jazzy Battery Chargers
and Jet power chair battery chargers:
Jet Battery Chargers
As an authorized Pride Mobility dealer, including Jazzy and Jet power chairs, we understand the unique needs of our customers, requiring quick delivery and quality replacement mobility parts. We provide high quality OEM power chair battery chargers at discounted prices.
Please contact us today, phone at 1-800-798-0325 or email at contact@Monsterscooterparts.com and a courteous customer service representative will work with you to get your part to you swiftly and safely, and get you back on the move!
Glenn
glenn@Monsterscooterparts.com
http://www.monsterscooterparts.com/
Tuesday, February 26, 2008
Honda Aero & Elite Scooter Parts
We continue to expand our product line for 2008 by offering scooter parts for Classic Honda Aero & Elite scooters. Check out our updated Honda Scooters page here:
Honda Scooter Parts
to view Honda compatible scooter batteries and scooter tires. Here you will find premium quality scooter batteries from Gruber Power identified by Honda model:
Honda Scooter Batteries
Anyone unfamiliar with the classic Honda Aero (NH) and Elite (CH) Scooter line, here is a bit from http://www.wikipedia.org/:
AERO
"The Honda NH is series of scooters sold worldwide from 1984 to present in 50, 80, 90, 100 and 125cc versions. All models have an air cooled 2 stroke engine with CDI ignition. All models (with the exception of the Honda Lead 50) have leading link front suspension, electric and kick start, and a fuel gauge. The Honda Lead 50 has traditional telescopic fork front suspension and ONLY electric start. All models have drum breaks, speedo, CVT transmission."
ELITE
"In the early 1980s, Honda hit the market with a line of scooters known as the CH series, comprising the CH50, 80, 125, 150, and 250 models. In the U.S., these were known as "Elite" scooters but overseas they were marketed under the "Spacy" name. While they were useful as "scooters", generally their performance and comfort levels limited them to short trips. However, when the CH250 was introduced it could reach highway speeds and be used for long-range touring. This new use of scooters (that is, the CH250) was mainly confined to the United States. Even with the Elite 250 writing a new definition of the word scooter, it still suffered from the limitations of all scooters: limited storage capacity, short wheelbase, small size and not comfortable enough for extended riding periods.
Honda's response was the CN250 or Helix. Honda had lengthened the CH250 by 14 inches, placed an integrated trunk in the rear of the machine and lowered the seat. The added length allowed what many have referred to as a "Barcalounger" seating position and a smoother ride than that of previous models. The top speed of the machine was limited to 70-75, (however speeds of 77 have been obtained) MPH (about 113-121 km/h) but the drivetrain was of an understressed design allowing extended running at or near top speed."
Please check back often as we are currently updating our site with compatible scooter parts for Yamaha, Baja Motorsports, EVT America, Hyosung, Meitian, Panterra, Suzuki, DDR, and E-Ton scooters.
Glenn
glenn@Monsterscooterparts.com
http://www.monsterscooterparts.com/
Honda Scooter Parts
to view Honda compatible scooter batteries and scooter tires. Here you will find premium quality scooter batteries from Gruber Power identified by Honda model:
Honda Scooter Batteries
Anyone unfamiliar with the classic Honda Aero (NH) and Elite (CH) Scooter line, here is a bit from http://www.wikipedia.org/:
AERO
"The Honda NH is series of scooters sold worldwide from 1984 to present in 50, 80, 90, 100 and 125cc versions. All models have an air cooled 2 stroke engine with CDI ignition. All models (with the exception of the Honda Lead 50) have leading link front suspension, electric and kick start, and a fuel gauge. The Honda Lead 50 has traditional telescopic fork front suspension and ONLY electric start. All models have drum breaks, speedo, CVT transmission."
ELITE
"In the early 1980s, Honda hit the market with a line of scooters known as the CH series, comprising the CH50, 80, 125, 150, and 250 models. In the U.S., these were known as "Elite" scooters but overseas they were marketed under the "Spacy" name. While they were useful as "scooters", generally their performance and comfort levels limited them to short trips. However, when the CH250 was introduced it could reach highway speeds and be used for long-range touring. This new use of scooters (that is, the CH250) was mainly confined to the United States. Even with the Elite 250 writing a new definition of the word scooter, it still suffered from the limitations of all scooters: limited storage capacity, short wheelbase, small size and not comfortable enough for extended riding periods.
Honda's response was the CN250 or Helix. Honda had lengthened the CH250 by 14 inches, placed an integrated trunk in the rear of the machine and lowered the seat. The added length allowed what many have referred to as a "Barcalounger" seating position and a smoother ride than that of previous models. The top speed of the machine was limited to 70-75, (however speeds of 77 have been obtained) MPH (about 113-121 km/h) but the drivetrain was of an understressed design allowing extended running at or near top speed."
Please check back often as we are currently updating our site with compatible scooter parts for Yamaha, Baja Motorsports, EVT America, Hyosung, Meitian, Panterra, Suzuki, DDR, and E-Ton scooters.
Glenn
glenn@Monsterscooterparts.com
http://www.monsterscooterparts.com/
Thursday, February 21, 2008
Baja Motorsports ATV Parts and More!
We are pleased to announce that we are now an authorized repair and service center for the entire Baja Motorsports lineup, providing original equipment replacement parts for Baja Motorsports all terrain vehicles, dirt bikes, go-karts, mini bikes, motorcycles, and street legal scooters. Please click the link below to view our Baja Motorsports parts pages at Monster Scooter Parts:
CLICK HERE for Baja Motorsports Parts
(currently under contstruction)
Please check back often as we are adding compatible atv & scooter parts daily; starting with tires, tubes, pull starts, and carbuerators. If you require any Baja Motorsports parts that are not currently posted on the Monster Scooter Parts website, please contact us at 1-800-798-0325 and we'll get the part to you ASAP.
Happy motoring...
Glenn
glenn@monsterscooterparts.com
http://www.monsterscooterparts.com/
CLICK HERE for Baja Motorsports Parts
(currently under contstruction)
Please check back often as we are adding compatible atv & scooter parts daily; starting with tires, tubes, pull starts, and carbuerators. If you require any Baja Motorsports parts that are not currently posted on the Monster Scooter Parts website, please contact us at 1-800-798-0325 and we'll get the part to you ASAP.
Happy motoring...
Glenn
glenn@monsterscooterparts.com
http://www.monsterscooterparts.com/
Monday, February 18, 2008
Parts for Mobility Scooters and Power Chairs - Tires and Inner Tubes
Monster Scooter Parts is committed to becoming the Internet's largest supplier of parts for mobility scooters and power chairs.
We have teamed up with several tire and tube suppliers to offer a complete line of mobility tires and tubes for all major mobility scooter models including those from Pride Mobility, Shoprider, Rascal, Hoveround, Invacare, Amigo, Merits, Jazzy, Jet, and more.
We carry solid foam-filled tires as well as pneumatic air-filled tires in many sizes and tread patterns and are adding new items every day! If you cannot find the proper tire to fit your scooter or chair, please send us an e-mail at contact@monsterscooterparts.com or give us a call at 1-800-798-0325 and we will be happy to help you out. If you don't find it listed on our website, don't despair - we can probably still get the tire or tube you need!
Kevin
kevin@monsterscooterparts.com
http://www.monsterscooterparts.com/
We have teamed up with several tire and tube suppliers to offer a complete line of mobility tires and tubes for all major mobility scooter models including those from Pride Mobility, Shoprider, Rascal, Hoveround, Invacare, Amigo, Merits, Jazzy, Jet, and more.
We carry solid foam-filled tires as well as pneumatic air-filled tires in many sizes and tread patterns and are adding new items every day! If you cannot find the proper tire to fit your scooter or chair, please send us an e-mail at contact@monsterscooterparts.com or give us a call at 1-800-798-0325 and we will be happy to help you out. If you don't find it listed on our website, don't despair - we can probably still get the tire or tube you need!
Kevin
kevin@monsterscooterparts.com
http://www.monsterscooterparts.com/
Sunday, February 17, 2008
Pride Mobility Scooter Parts
Monster Scooter Parts is proud to be an authorized Pride Mobility provider. If you need a replacement part for your Pride scooter, look no further! Pride Mobility also produces industry leading Jazzy power chairs, Jet power chairs, and Go-Go travel mobility scooters. As an authorized Pride dealer, we now have access to Original Equipment Manufacturer (OEM) parts supporting all four brands.
We offer all Pride Mobility OEM parts at discounted pricing up to 45% off MSRP. In addition, we offer non-OEM versions of some parts such as battery chargers, tires, and tubes at even greater discounts.
We have many common replacement parts such as batteries, chargers, tires, and tubes in stock and ready for immediate shipping. Other parts are available for special order and are typically ready to ship out in just a few days!
Please visit our mobility scooter pages to scooter and power chair parts available for online ordering:
Mobility Scooter Parts by Make and Model
If the scooter part or power chair part you need is not listed, please give us a call at 1-800-798-0325 or e-mail us at mailto:pride@monstercooterparts.com for pricing and availability. If you are able to locate your serial number, please provide your serial number to us for the fastest service.
Glenn
glenn@monsterscooterparts.com
http://www.monsterscooterparts.com/
We offer all Pride Mobility OEM parts at discounted pricing up to 45% off MSRP. In addition, we offer non-OEM versions of some parts such as battery chargers, tires, and tubes at even greater discounts.
We have many common replacement parts such as batteries, chargers, tires, and tubes in stock and ready for immediate shipping. Other parts are available for special order and are typically ready to ship out in just a few days!
Please visit our mobility scooter pages to scooter and power chair parts available for online ordering:
Mobility Scooter Parts by Make and Model
If the scooter part or power chair part you need is not listed, please give us a call at 1-800-798-0325 or e-mail us at mailto:pride@monstercooterparts.com for pricing and availability. If you are able to locate your serial number, please provide your serial number to us for the fastest service.
Glenn
glenn@monsterscooterparts.com
http://www.monsterscooterparts.com/
Friday, February 15, 2008
Universal Scooter Speed & Voltage Controllers
Greetings Monster Scooter Parts blog readers.
We have resolved in 2008 to provide more frequent blog entries than were listed in 2007. We feel brief, numerous entries discussing the technical challenges in repairing and replacing your electric and gas scooter parts will be of a great value.
Today's topic: Universal Scooter Controllers.
A late addition in 2007, our new universal speed & voltage controllers page is here:
Universal Scooter Controllers
We've provided as much detail as possible regarding the connections of our controllers, namely connections for the scooter electric motor, battery pack, battery charger, keyswitch, and the scooter throttle, just to name a few. However, there are hundreds of varieties of branded and generic electric scooters that have been sold in the United States, and many using a different factory for their scooter parts. Often times the connectors on our voltage controllers do not match up with the connections on our customer's particular motor scooter.
Our customer service agents and technical support team will do their best to communicate with you and get your motorized scooter on the road again using our replacement parts. However, often times, even with pictures emailed back and forth, it will fall upon the customer to identify the function of your wiring on your electric scooter. It may be necessisary to keep your old controller connected, and follow the unmarked controller connector's wiring thru your scooter to identifiy where it goes. For example, if a set of wires lead back to your handlebars and to your scooter's hand throttle, that is the wiring for the hand throttle. Knowing that, you can simply match those wires up to the wires provided on our voltage controller, with the details listed on Monster Scooter Part's website.
Additionally, in our Razor scooter parts lineup we have Razor controllers here:
Razor Scooter Parts - Controllers
And finally, in our Schwinn, Mongoose, IZIP, and GT scooter parts lineup we have Currie Technology controllers here:
Schwinn Scooter Parts - Controllers
Best of luck, and check back often. We have additional selections of scooter parts on order, and our scooter controller section will offer an expanded lineup in the near future.
Keeping you rolling,
Glenn
glenn@monsterscooterparts.com
http://www.monsterscooterparts.com/
We have resolved in 2008 to provide more frequent blog entries than were listed in 2007. We feel brief, numerous entries discussing the technical challenges in repairing and replacing your electric and gas scooter parts will be of a great value.
Today's topic: Universal Scooter Controllers.
A late addition in 2007, our new universal speed & voltage controllers page is here:
Universal Scooter Controllers
We've provided as much detail as possible regarding the connections of our controllers, namely connections for the scooter electric motor, battery pack, battery charger, keyswitch, and the scooter throttle, just to name a few. However, there are hundreds of varieties of branded and generic electric scooters that have been sold in the United States, and many using a different factory for their scooter parts. Often times the connectors on our voltage controllers do not match up with the connections on our customer's particular motor scooter.
Our customer service agents and technical support team will do their best to communicate with you and get your motorized scooter on the road again using our replacement parts. However, often times, even with pictures emailed back and forth, it will fall upon the customer to identify the function of your wiring on your electric scooter. It may be necessisary to keep your old controller connected, and follow the unmarked controller connector's wiring thru your scooter to identifiy where it goes. For example, if a set of wires lead back to your handlebars and to your scooter's hand throttle, that is the wiring for the hand throttle. Knowing that, you can simply match those wires up to the wires provided on our voltage controller, with the details listed on Monster Scooter Part's website.
Additionally, in our Razor scooter parts lineup we have Razor controllers here:
Razor Scooter Parts - Controllers
And finally, in our Schwinn, Mongoose, IZIP, and GT scooter parts lineup we have Currie Technology controllers here:
Schwinn Scooter Parts - Controllers
Best of luck, and check back often. We have additional selections of scooter parts on order, and our scooter controller section will offer an expanded lineup in the near future.
Keeping you rolling,
Glenn
glenn@monsterscooterparts.com
http://www.monsterscooterparts.com/
Subscribe to:
Posts (Atom)